Draft Load Sensing Pin Elimination Kit Steiger
WE-40510010-3
$160.00
WE-40510010 Draft Load Sensing Pin Elimination Kit
Includes:
(2) Modules, (4) Tie Wraps & Installation Instructions
Replaces Part #:
1964916C1, 1964916C3, 305135A1, 403057A3, 403057A1, 6521562M1
Purpose:
This module kit is used to eliminate the need for the factory load sensing pin to be connected and allow manual use of the 3-point hitch. This module kit will eliminate the draft sensing function of the tractor completely so that the diagnostic system will not detect defective pins.
Fitment:
Case IH: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 9110, 9130, 9150, 9210, 9230, 9240, 9250, 9260, 9310, 9330, 9350, CX100, CX50, CX60, CX70, CX80, CX90, MX100, MX100C, MX110, MX120, MX135, MX150, MX170, MX90C
McCormick: MC100, MC105, MC110, MC115, MC120, MC125, MC130, MC135, MC80, MC90, MC95, MTX110, MTX120, MTX125, MTX135, MTX140, MTX145, MTX150, MTX155, MTX165, MTX175, MTX185, MTX200
Steiger: 9110, 9130, 9150, 9210, 9230, 9240, 9250, 9260, 9310, 9330, 9350
Note: Will not work on following models if equipped with older style round threaded connections:
7110, 7120, 7130, 7140, 7150. Order (2) WE-40510012 harness adapters
Note: Only fits the following models with S/N JCB0003600 & After, if equipped with draft control:
9110, 9130, & 9150
Installation Guide:
- Locate the wiring harness for both sensor pins and locate where sensor pin harness is plugged into tractor harness. Connectors are located under the rear of cab on the forward side of the three-point hitch housing. Note there are two harnesses that will be disconnected.
- Unplug both sensor pin harness and plug replacement 830485WE module into tractor side harness.
- Using the supplied 8” plastic ties, secure the load sensing elimination modules to prevent damage during movement of tractor mechanical linkages and hitch arms.
- After replacement with load sensing elimination modules the hitch controls will only function in manual mode with no draft control functionality.
Quantity
Make
Steiger
Category
Models
9110, 9130, 9150, 9210, 9230, 9240, 9250, 9260, 9310, 9330, 9350
Replaces Part #
Tech Info
This module kit is used to eliminate the need for the factory load sensing pin to be connected and allow manual use of the 3-point hitch. This module kit will eliminate the draft sensing function of the tractor completely so that the diagnostic system will not detect defective pins.Will not work on following models if equipped with older style round threaded connections: 7110, 7120, 7130, 7140, 7150. Must order WE-2550012 in addition to the WE-2550010 elimination kit to use on the older style round threaded connectors
Industry
Add a Title
