The WE-2300051 KIT 11" LuK Dual Stage Clutch Kit, w/ Bearings - New fits equipment brands such as: Case IH, New Holland

There are multiple clutch options, which you should positively identify before ordering. Verify fitment in information provided below. If you have questions, please feel free to give us a call or send us an email to our technical help desk.  This is a Safety PTO Clutch. Check that the flywheel disc is free after installation.

Includes: PPA, 6-Pad Captive Disc,  Flywheel Disc & Release Bearing

Application Fitment

T4.100F - Yr. 3/16 thru 12/17, w/ 4-Pad Flywheel Disc, Mechanical Shuttle

T4.100V - Yr. 3/16 thru 12/17, w/ 4-Pad Flywheel Disc, Mechanical Shuttle

T4.105V - w/ 4-Pad Flywheel Disc, Mechanical Shuttle

T4.85F - w/ 4-Pad Flywheel Disc, Mechanical Shuttle

T4.85V - w/ 4-Pad Flywheel Disc, Mechanical Shuttle

T4.90F - w/ 4-Pad Flywheel Disc, Mechanical Shuttle

T4.90LP - w/ 4-Pad Flywheel Disc, Mechanical Shuttle

T4.90V - w/ 4-Pad Flywheel Disc, Mechanical Shuttle

T4.95F - Mechanical Shuttle

T4.95V - Mechanical Shuttle

T4020 - Mechanical Shuttle

T4020V - Mechanical Shuttle

T4030 - Mechanical Shuttle

T4030F - Mechanical Shuttle

T4030V - Mechanical Shuttle

T4040 - Mechanical Shuttle

T4040F - Mechanical Shuttle

T4040N - Mechanical Shuttle

T4040V - Mechanical Shuttle

T4050 - Mechanical Shuttle

T4050F - Mechanical Shuttle

T4050N - Mechanical Shuttle

T4050V - Mechanical Shuttle

T4060F - w/ 4-Pad Flywheel Disc, Mechanical Shuttle

T4060N - w/ 4-Pad Flywheel Disc, Mechanical Shuttle

T4060V - w/ 4-Pad Flywheel Disc, Mechanical Shuttle

TN55 - Eff. 09/99, Mechanical Shuttle

TN60A - Eff. 01/03

TN60VA

TN65 - Eff. 09/99

TN65F - w/ 4-Pad Flywheel Disc, Mechanical Shuttle

TN65V

TN70 - Eff. 09/99

TN70A - Mechanical Shuttle

TN70D - Eff. 09/99

TN70NA

TN70VA

TN75 - Eff. 09/99, Mechanical Shuttle

TN75A - Mechanical Shuttle

TN75D - Eff. 09/99, Mechanical Shuttle

TN75F - Mechanical Shuttle

TN75V - Mechanical Shuttle

TN75VA - Mechanical Shuttle

TN85A - Eff. 01/03

TN85DA - Eff. 01/0

TN85FA - Eff. 01/03

TN85SA - Mechanical Shuttle

TN90F - Eff. 09/97, Orchard Tractor

TN95A - Eff. 01/03

TN95DA - Eff. 01/03

TN95F - Eff. 10/01,Orchard Tractor

TN95FA - Orchard Tractor

TN95NA - Orchard Tractor, Mechanical Shuttle

TN95VA - Eff. 01/03

What is a Safety PTO Clutch?

Safety PTO Clutches perform the same function as a standard dual clutch with two independently actuated clutches in one assembly. In a Safety PTO Clutch, the PTO lever action works the opposite way. It depresses the levers, forcing the pressure plate against the flywheel, trapping the PTO disc, and creating drive at the PTO output shaft. The PTO disc is normally always disengaged and can only be engaged by the operator moving a mechanical lever. In the event of PTO linkage failure during operation of the tractor, the PTO will automatically fail safe and disengage. Also, during start up the PTO is disengaged.

Care must be taken when replacing this type of clutch so that the loose PTO disc is correctly located to the engine’s flywheel. The disc will remain loose after bolting the clutch to the flywheel. The PTO disc spline has a large leading edge to assist correct alignment during tractor reassembly. The PTO disc has locating dowels for centralizing the disc within the pressure plate during assembly.